What to Expect
Wastewater Treatment Applications
Wastewater Treatment Applications
Soda ash is the most used treatment for a low pH reading in a wastewater stream. It is inexpensive, safe and able to be released without EPA concern. Soda ash is raw, uninhibited scale, by nature. Slurry pumps used to push the lime slurry into the water stream are subject to lime scale buildup. The ScaleBlaster System placed on the suction side of the pumps will prevent scale deposition on the pumps.
The chlorine lines and pumps that are used to feed chlorine into the treatment stream become full of lime scale deposits and must be cleaned. The ScaleBlaster System will keep scale particles suspended in solution and off the pump surfaces.
The ScaleBlaster System will keep the calcium carbonate ions in solution, preventing the calcification of the resin bed and the formation of channels in the bed that lead to ineffective treatment.
Potential reduction of polymer usage and increased dewatering capabilities.
The ScaleBlaster System will protect the discharge line, keeping it free of lime scale caused by heavy concentrations of the calcium carbonate.
The ScaleBlaster System benefits sensors, probes, and control valves. Calcium particles remain suspended in solution and will not leave deposits on vital measuring equipment.
Using lime to treat high pH water or soda ash to treat low pH water can present some of the greatest scale control challenges in the industry. The lime or soda ash is mixed with water to form a slurry and then is pumped into the water to be treated. The mixing tank is prone to scale deposition on the sides and the mixing propeller gets scale buildup, too. The ScaleBlaster System can treat the water to be mixed and will keep the tank sides and propeller clear of lime scale buildup.
ScaleBlaster will prevent calcium coming out of solution and plugging up the sodium bisulfite lines used to remove chlorine and control pH levels.
ScaleBlaster forms soft sludge instead of hard lime scale for decreased cleaning frequency and easier removal.
ScaleBlaster will remove limescale formation in the chemical feed lines and allow for optimal flow rates throughout the disinfection system from the injector to the contact basin.
The ScaleBlaster System will protect the discharge line, keeping it free of lime scale caused by heavy concentrations of the calcium carbonate.
Environmental issues and the “going green” movement is an important issue than ever before. ScaleBlaster is the ideal environmental product.
© Clearwater Enviro Technologies, Inc. ScaleBlaster is a registered trademark of CET. All Rights Reserved.